Salt Away

Product Description

Salt-Away is a water-based, non-hazardous, biodegradable solution and contains properties that dissolve, release and remove salt crystals from any surface.  Water alone will not remove salt.  Use of Salt-Away will not correct past damage but will work to protect against salt corrosion and reduces costly repairs caused by salt. Salt-Away's formula breaks apart and removes salt accumulation with repeated use.


Salt-Away can safely be used on all metals, fiberglass, paint, rubber, plastic, chrome, glass, concrete, brick or any surface exposed to salt. Salt-Away, mixed with water, washes away the salt then leaves a protective film on surfaces until surfaces are again exposed to water or salt. Special high-performing corrosion inhibitors in the product help protect metals from corroding if not rinsed off. Salt-Away will not strip wax or cause  streaks or spots. It is easy to apply by using pressure or power washers,  Salt-Away's special Mixing Unit, the ready-to-use spray bottles for smaller jobs, and by immersing items into a mixture of Salt-Away and water. 


Advantages

• Non Hazardous. Contains no hazardous chemicals • Non-Toxic. Safe to use around plants, children, pets and all living things • Biodegradable. All ingredients biodegrade into the environment • Environmentally Safe. Has no deleterious effects in the environment • Safe to discharge into  normal drainage outlets connected to filter systems • Water based • Contains no petroleum products • Contains no chemical solvents • Does not react chemically or physically as an emulsifier on lubricants and coatings • Inhibits rusting and corrosion • Completely removes fresh salt • Salt-Away meets ISO 8502-6:2006 requirements for preparation of steel substrates before application of paints and related products • Breaks down layers of salt accumulation • Is chemically dissimilar to any competitive product • Ingredients are the highest quality available

• Tested to be safe to use on virtually all surfaces, including Magnesium, Aluminum, Iron, Copper, Steel, Stainless Steel, Chrome, Paint, Gel Coat, Nylon, Isinglass, Vinyl, Plastic, Glass, Wood, Leather, Rubber, Canvas, Concrete, Brick.

 

Applications

• 30-second engine flushes • Diving & fishing gear • Industrial chloride removal • Over-heating engine correction • Oceanside home maintenance; A/Cs, patio furniture • Boat, trailer, brake wash • Windows, casings, awnings • Sail boat salt removal; sails, sail covers, line, hardware

• Metal hinges, hardware, gates, fencing


Contact Us for industrial sales and other inquires. 

image7

Facts about Salt Away

Facts about Salt

Salt does not “cause” corrosion. Three elements are required to create corrosion:

 1. A corrodible material, 2. Oxygen, 

3. Moisture.

Find out more

How Salt Away Works

There are 3 basic methods for moving salt from surfaces with Salt-Away - Immersion, Pressure and Wet vacuuming

Find out more

Salt-Away Description and Characteristics

When applied to surfaces and not rinsed off, it offers protection from rusting and corrosion.

Find out more

Dilution Ratios

Application Methods and Recommended Dilution Ratios

Find out more

Salt Water Boat Engine Flushing

For removing salt, inhibiting corrosion and breaking down salt accumulation in your engine’s salt water cooling system.

Find out more

Exterior Washing

Leaves an invisible protective film containing high-performing corrosion inhibitors to protect from rusting until surface is again exposed to water or salt

Find out more

Applications

Motor Flush

image8

Salt-Away does 3 major jobs when used as an engine flush. It flushes out the fresh salt, it protects the inside from rusting and corroding, and it begins to break apart salt accumulation. It takes less than 1 minute to flush salt from your outboard, I/O or inboard engine. 


Use the remainder of the Salt-Away in the container to spray the salt off your fishing boat. The 6 fl oz (177 ml) reservoir on Salt-Away’s unique dispenser, will flush an engine and wash a boat and trailer up to approximately 45 feet (14 m) in length.

Industrial Marine Applications

image9

Use on Air conditioning system, Commercial diving equipment, BCs, connectors, suits, cameras, fittings, recessed bolts and other recessed connectors, Generators, Hinges, winches, Lock sets, valves and gauges,  Marine deck hardware & rigging equipment, Optical lenses, Radar systems, Pneumatic and Hydraulic equipment, Printed circuit boards, Refrigeration systems, Salt water engines, Canvas snaps, zippers, Diving regulator, BC, goggles, Water-safe electronic/electrical equipment, Satellite communication towers & systems, Transformers and more. 

Service Vehicles

image10

Salt-Away is the best solution to save your vehicles and other property from salt damage. Treating the undercarriage, wheel wells, wheels, fenders, bumpers, or any part of your vehicle or other equipment with Salt-Away works to protect against salt corrosion and reduces costly repairs caused by the corrosive action of salt.


Water alone will not remove salt. Remove salt from Body, Undercarriage, Exhaust system, Brakes, Wheels, Tires, Bumpers, Car Parts, Car Mats, Carpets, Windshields, Spoke wheels, Chrome wheels, Tools and more. 

Coatings and Construction

image11

Salt-Away is currently being used in the coatings industry to remove salt prior to applying paints and other coatings. Salt-Away meets ISO 8502-6:2006 requirements for preparation of steel substrates before application of paints and related products.


It is easy to apply by using pressure or power washers,  Salt-Away's special Mixing Unit, the ready-to-use spray bottles for smaller jobs, and by immersing items into a mixture of Salt-Away and water. 


Contact Us for industrial sales and other inquires. 


Industrial Applications

image12

Salt-Away can break apart salt accumulation that inhibits movement in tight areas such as turbine hubs on wind turbines.

Very effective on Electrical connectors, Lock sets, gauges, battery posts and battery corrosion, Recessed bolts, metal connectors, Water-safe switches, valves, fittings, Hinges, other hardware, Pliers & other hand tools, Printed circuit boards, Underwater cameras, Gauge and meter housings.


Contact Us for industrial sales and other inquires. 



Personal Watercraft

image13

Salt-Away has been approved by the IJSBA and is the recommendation by the 2 largest PWC manufacturers. Just connect the Salt-Away Mixing Unit to your flush-out device with the valve turned to "Salt-Away". Turn on the water, then the engine, and flush for 20-30 seconds. Shut down the engine, then turn the Mixing Unit to ‘Off", leaving Salt-Away inside your engine. Do not rinse the engine with fresh water. The residue left inside will protect the engine from corroding. Please follow the manufacturer's instructions for flushing. However, it is not necessary to flush for longer than 30 seconds. Salt-Away completes the job in that amount of time.

Products

Salt-Away - SA32-M Concentrate with Mixing Unit

Packaged as one 32 Fluid Ounce (946 mL) bottle of Salt-Away Concentrate with Salt-Away’s unique Mixing Unit included. Recommended as the ‘Starter Kit’ for new customers of Salt-Away.

The Mixing Unit connects to a garden hose for dispensing. The Kit contains everything needed to get started using Salt-Away. No need to purchase Mixing Unit again. 

Refills of 32 fl oz or 128 fl oz may be purchased.


Application Methods and Recommended Dilution Ratios 


Buy Now - find retail account near you.


Contact Us for industrial sales and other inquires. 

image14

Salt-Away - SA32 Quart Concentrate

After purchasing and using the KIT,  purchasing a 32 fl oz (946 mL) container of Salt-Away Refill Concentrate is a recommended choice, depending on frequency of use, area to cover, and economic considerations. Mixing Units can be ordered independently of the Kits. 


Application Methods and Recommended Dilution Ratios


Buy Now - find retail account near you. 


Contact Us for industrial sales and other inquires. 

image15

Salt-Away - SA128 Gallon Concentrate

After purchasing and using the KIT, purchasing SA128 - 128 fluid ounces (GALLON) Salt -Away Concentrate Refill is a recommended choice, depending on frequency of use, area to cover, and economic considerations. A customer may want to start using Salt-Away by purchasing SA128 and a Mixing Unit- SAM. Mixing Units can be ordered independently of the Kits.  


Application Methods and Recommended Dilution Ratios 


Buy Now - find retail account near you. 


Contact Us for industrial sales and other inquires. 

image16

Salt-Away - SA16 • 16 FL OZ • Ready to Use

The 16 fl oz Professional Strength Spray item is formulated for stubborn areas where salt has accumulated. Spray on. Let rest for a few minutes. Rinse. Additional applications may be required. Scrubbing not necessary in most cases, but ok if desired. Removes heavy build-up and is used for maintenance on smaller items.


Buy Now - find retail account near you.


Contact Us for industrial sales and other inquires. 

image17

Salt-Away - SA04 • 4 FL OZ • Ready to Use

This 4-fl oz  spray is a mild formula designed for use on small items and on items that may require a gentler application of pressure. Safe for all surfaces. No need to rinse. Regular use prevents build-up.


Applications

Fishing rods, reels, line, guides, tackle • Optical instruments • Monofilament line •  spectra

 • Leaves no scent in water • Printed circuit boards • Diving regulator, buoyancy compensator

goggles • Gauge & meter housings • Diving bag, snaps, zippers • Water-safe switches


Buy Now - find retail account near you.


Contact Us for industrial sales and other inquires. 

image18

Salt-Away - SAM - Mixing Unit

Salt-Away's Mixing Unit (SAM) is the most popular way to dispense the Salt-Away Concentrated formula. The receptacle holds 6 fl oz (177 ml). Constructed with a 3-position valve (Off, Rinse, Salt-Away) and is available as part of the KIT, or can be purchased by itself. O-ring in receptacle prevents leakage. It must be in place at all times.


The Mixing Unit is the required delivery system for many Salt-Away applications, including Outboard, I/O, PWC Jet Engine Flushes, most Inboard Flushes, and Pressure Washers. 

For Pressure Washers, connect inline between the water hose and the hose inlet connection on the pressure washer. Either size reservoir, 6 fl oz (177 ml), or 12 fl oz (355 ml), can be chosen for any of these applications.

 

For easy connection to hose fittings, the out-flow end is constructed with male threads and with female threads for the in-flow handle end. The unit is warranted to withstand water pressure up to 60psi. Salt-Away is manufactured to be dispensed from the Mixing Unit at a ratio of 1 part Salt-Away to 500 parts water. We recommend customers dispense Salt-Away with the Mixing Unit when the size of the project requires this type of equipment. Our claims for the performance of Salt-Away are based on testing and the use of this product.


Buy Now - find retail account near you.


Contact Us for industrial sales and other inquires. 

image19

Downloads

Facts About Salt (pdf)

Download

How Salt Away Works (pdf)

Download

Salt Away Description and Characteristics (pdf)

Download

Salt Away Dilution Ratios (pdf)

Download

Salt Away Engine Flushing (pdf)

Download

Instructions for Exterior Washing (pdf)

Download

SAM Mixing Unit Info (pdf)

Download